Project usense: Difference between revisions
Jump to navigation
Jump to search
(→NOTES) |
(→NOTES) |
||
| Line 27: | Line 27: | ||
* Cheap | * Cheap | ||
* Factory calibrated | * Factory calibrated | ||
* Probe on TEMPer1 is salt-water tolerant | * Probe on TEMPer1 is not salt-water tolerant over a long period | ||
After about 3-4 months, salt water will get between the wire and the epoxy, and reach the integrated circuit inside. I do '''not''' recommend this device as-is for salt-water immersion. | |||
= Download = | = Download = | ||
Get it from [http://github.com/ezrec/usense my GitHub repo]. | Get it from [http://github.com/ezrec/usense my GitHub repo]. | ||
Revision as of 01:31, 1 October 2009
usense USB Sensors
Supports the Vernier GoTemp and the TEMPer1 USB temperature sensors via libusb.
Vernier GoTemp!
The Vernier GoTemp! looks like this:
NOTES
- Expensive
- Requires calibration
- Probe is not salt-water tolerant
TEMPer
The TEMPer1 and TEMPerNTC devices look like this:
Supports the TEMPer, TEMPer1 (with external probe), and TEMPerNTC (with external probe)
NOTES
- Cheap
- Factory calibrated
- Probe on TEMPer1 is not salt-water tolerant over a long period
After about 3-4 months, salt water will get between the wire and the epoxy, and reach the integrated circuit inside. I do not recommend this device as-is for salt-water immersion.
Download
Get it from my GitHub repo.