CR-30 Belt Printer

The Creality CR-30 is a belt printer.

KlipperWRT Setup

Reprogram your Creality Box with KlipperWrt using this guide.

1. Check out Klipper at git hash d619796495d24d4e4c3e6b9bf2b5842db18b1c01

$ git clone https://github.com/KevinOConnor/klipper
$ git checkout -b ${USER}/cr30 d619796495d24d4e4c3e6b9bf2b5842db18b1c01

2. Copy this klipper.bin file to your SD card, and power cycle your printer.

  a. Firmware update takes approx 30s
  b. Your screen will remain blank - this is normal

3. Use the this printer.cfg to configure klipper: (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail)

4. Use `service klipper restart` on the Creality Box SSH console, or via the Fluidd/Mainsail interface