Project usense

usense USB Sensors

Supports the Vernier GoTemp and the TEMPer1 USB temperature sensors via libusb.

Vernier GoTemp!

The Vernier GoTemp! looks like this:

NOTES

• Expensive
• Requires calibration
• Probe is not salt-water tolerant

TEMPer

The TEMPer1 and TEMPerNTC devices look like this:

Supports the TEMPer, TEMPer1 (with external probe), and TEMPerNTC (with external probe)

NOTES

• Cheap
• Factory calibrated
• Probe on TEMPer1 is not salt-water tolerant over a long period

After about 3-4 months, salt water will get between the wire and the epoxy, and reach the integrated circuit inside. I do not recommend this device as-is for salt-water immersion.

Download

Get it from my GitHub repo.